Digital Humidity Controller, XH-W3005 [PC-1119]

Power Type: 220V
Display Type: Digital
Humidity Range: 00% - 99% RH
Measuring Accuracy: + / - 2% RH
Control Accuracy: + / - 0.1% RH
Output Capacity: up to 10A
Output Type: Direct Output
Item Size: 60 * 45 * 31mm / 2.36 * 1.77 * 1.22in
Hole Size: 73mm / 2.87in
Aperture Size: 4mm / 0.16in
Package Size: 60 * 45 * 31mm / 2.36 * 1.77 * 1.22in
Item Weight: 80g / 2.82ounce
Package Weight: 90g / 3.17ounce

Features:

Brand new and fine quality ABS material, not easy aging.
A stable and safe chip makes this device more intelligent and effective.
After trepanning, it can install or embed on various equipment and was convenient as well as practical.
Can be used to control the humidity in many places, such as farm and other factories.
This new design digital humidity controller with fine quality is practical to install and use, also has good performance.

Note:
Connect to power supply, display instructions humidity.
Set to start the Humidity: Press the UP button display and start the humidity, long press about 3 seconds to start the humidity flashing, then press the Up or right down to adjust the settings.
Set to prevent the Humidity: Press the Down button display and stop the humidity, long press about 3 seconds to prevent the humidity from flashing, then press the Up or right down to adjust the settings.
Restore the Factory Settings: Press the Up and Down button at an equivalent time, it'll display 888 then will automatically detect the humidity.